Clear all

After adding Auto-Shutdown hardware the machine will no longer print

Phil Ershler
New Member
Joined: 8 months ago
Posts: 4
Topic starter  

Since I installed the auto-shutdown hardware, the machine will no longer print. I wait until the extruder and the bed have reached the proper temperatures. Then I hit the Print button. The print screen comes up, but the machine never starts to print. Hitting the pause button does nothing.  After about a minute, the printer just turns off. I installed the latest Tycoon Max firmware and the Auto-Shutdown firmware. I don’t know how to troubleshoot this problem. The printer was working fine before I added the Auto-Shutdown hardware.